Avanti Refrigerator WCR534WDZD E User Manual

0

Out of 0 Ratings

Owner's of the Avanti Refrigerator WCR534WDZD E gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 20
 
9
OPERATING YOUR WINE CHILLER
It is recommended you install the Wine Chiller in a place where the ambient temperature is between
72-78 degrees Fahrenheit. If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in extreme
cold or hot conditions may cause interior temperatures to fluctuate. The range of 40-65 degrees
Fahrenheit may not be reached.
Recommended Temperatures for Chilling Wine.
Red Wines
58 - 65 ºF
14 - 18 ºC
Dry / White Wines
48 - 57 ºF
10 - 13 ºC
Rose Wines
49 - 51 ºF
9 – 11 ºC
Sparkling Wines
40 - 47 ºF
5 - 8 ºC
ON/OFF POWER
To turn ON or OFF the appliance, press the ON/OFF button .
SETTING THE TEMPERATURE CONTROL
You can press SET button to control the internal temperature for each zone.
The degrees indicators will appear in the display windows marked TOP ZONE and BOTTOM ZONE.
• Press the SET button once.
The LED indicator on the TOP ZONE display will flash. Then press the UP
or DOWN
buttons to get the desired temperature in the top zone.
• When you press the SET button again, the LED indicator on the BOTTOM ZONE display
will flash. Then proceed to press the UP
or DOWN buttons to get the desired
temperature in the bottom zone.
• The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP
button
once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN
button
once.
The temperature range of TOP ZONE is 40 ~ 55ºF/ 5 ~ 13ºC which is suitable for storing sparkling
and white wines. The temperature range of BOTTOM ZONE is 55 ~ 65 ºF/13 ~ 18ºC which is suitable
for storing white and red wines.
• When you store mostly red wines, you should store them in the BOTTOM ZONE, the temperature
which you control needs to be set at between 58 to 65°F/14 to 18ºC and the red LED lamp
marked “RED” will be lit
The LED readout will show the original temperature set previously (the preset temperature at the
factory for TOP ZONE is 45ºF/7ºC and for BOTTOM ZONE is 55ºF/13ºC).
You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC
button. Fahrenheit or Celsius degrees indicators will appear in blue color in the temperature
display windows for each zone.

   Find Your Products By Category